Day off and for once I was home and able to take delivery of some more parts from auto craft that showed up.
Side pop out windows, shift rod, R/H bumper bracket and some small parts to connect the gear shift rod to the shift rod and gearbox.
tisdag 6 maj 2014
fredag 2 maj 2014
Bearings...here all the time -I know I'm as blind as a bat !
Fo rthe last week or soIve been sending emails to Paul, he has been chasing csp, all looking for the bearings that I didn't find in my front disc kit....
Gunter at Csp in Germany got back to me today saying that I should check again as I really should have them - Even though I had checked many times, it was niggling me that they could have slipped past my eyes, somehow....
so I went back up the garage just before closing on Friday afternoon, the garage was still open luckily so I ran around to where I am keeping the parts and looked in the boxes -
no way ! They were there !!! plain as could be??? I have bno idea how I missed them.
All this time - right under my nose!
So I immediately emailed Paul and Gunter and apologized for any wasted time!
All this time - right under my nose!
So I immediately emailed Paul and Gunter and apologized for any wasted time!
I'm happy though, this means that I have everything to build the front up now.
![]() |
| Doors have the final paint now, sealing wax and chestnut brown. |
![]() |
| movable bus once again. |
![]() |
| On the way home I stopped by minicars and picked up some aircraft- Henrik showed us the big quad copter - want! |
![]() |
| Boys have been making some show box models |
![]() |
| Gurra spotted by Travis on our way to vasteras |
Blasting again
Today I got to plumb some good air pressure into the blasting cabinet
for the 1st time - after setting up as best I could I then spent about 4
hours quite happily blasting away paint and rust on a number of small
pieces, bringing them back to bare metal all while listening to the UK Radio - sweet!
Some of the parts I have been blasting to bare metal - foot pedals, bumper brackets, steering arm, torsion tube covers ( these took some time!? ) hand brake parts, and door catches.
Pallets are good !
First up with some help from peka we moved the bus off the double post car ramp and lowered it onto a couple of pallets, at the rear of the bus we fastened some spare wheel dollies I had so we could move it around.
The front had to be pushed up a little and over the center part of the car ramp - so we used a pole and some ply wood and rolled it - cave man style!
it worked a treat and soon we had it rolling around the workshop - it can even roll no problem into the paint booth like this.
tisdag 29 april 2014
Nose cones
So why was my gearbox being pushed back? after a little detective work, it seems that with any early bus, ie before 59 that issues can arise with the front nose cone and mounting bracket for this area when installing a later gearbox.
check out the difference in these diagrams
below is early type (pre 1959/60 or up to chassis number 469505
below is the later from chassis number 469506
It was pretty easy to find an adapter / front mount, this is what I found first from Type 2 detectives.
"Heavy duty solid front gearbox mount for pre 1960 bus" link here
Then I found this from buttys bits
But although both of these mounts seem thinner then my set up just now, they still have issues with pushing out the box a bit, plus these are hard mounted meaning - possible vibration and for sure all that gearbox whirring will be passed through the nose cone and into the rear frame of the bus...
also whats going to happen when lining up the shift rod? issues I can see arising there too...
I kept looking around, checking out the standard mounts and differences and searching forums for similar problems, I found some and sussed out that replacing what I have with a hard mount like those above was infact going to be a step in the wrong direction for our bus build.
and then I came across the following two mounts which is what I was looking for, the first I had seen before but couldn't remember where ... maybe in a past issue of Volksworld magazine.
Wagenwest in the USA of course !
I also came across this one from Concept 1 in Canada
So the Wagenwest answer to the problem is the one I went for, the description says it all and because I have just had a brand new nose cone fitted, so do not really need to be buy another modified version (as in the concept 1 solution) .
If I had seen the concept 1 solution before I had the gearbox overhauled I probably would have chosen it - I managed to ordered this via wagenwest website very quickly this morning before work - looking forward to it receiving it and getting on with the install.
Wagen west´s discription :
"Pre 59 bus nose cone adapter kit"
"This kit makes it so you can install a tunnel case transmission into your early bus, 1959 and down.
This adapter will not push your transmission back, like the other adapters on the market !!!!!!!!
Made with Polyurethane to help insulate the transmission from the bus, this helps keep the noise down in the cab and cargo area.
Kit comes with one Wagenswest lollipop mount and retainer plate.
This Lollipop is a simple solution to an age old problem.
Your type II nose cone will need to be trimmed to fit, like the photo in this add "
This does leave bit of a dilemma for me though - what do I do with the bus while I wait for it to come here?
I think I need to get the bus off the ramp as its stuck there until I can get the rear and front suspension on and I don't want to hog peka´s car ramp....
two options as I see it, Take my wheel Dolley´s over and see if I can sit the bus on these, then at least we can move the bus from the ramp and Peka can use it, also it might mean that peka can get the shell into the paint booth ?
or take away the front mount now and install the box, axle arms, spring plates etc and loosly fit everything just for transpotation around the work shop, maybe I can wedge the front nose cone into place, or use the set up I have now but not bolted up?
Find out on Thursday which is when I can next get over to the bus.
check out the difference in these diagrams

It was pretty easy to find an adapter / front mount, this is what I found first from Type 2 detectives.
"Heavy duty solid front gearbox mount for pre 1960 bus" link here
![]() |
| 66.00 |
Then I found this from buttys bits
![]() |
| 28.00 |
also whats going to happen when lining up the shift rod? issues I can see arising there too...
I kept looking around, checking out the standard mounts and differences and searching forums for similar problems, I found some and sussed out that replacing what I have with a hard mount like those above was infact going to be a step in the wrong direction for our bus build.
and then I came across the following two mounts which is what I was looking for, the first I had seen before but couldn't remember where ... maybe in a past issue of Volksworld magazine.
Wagenwest in the USA of course !
I also came across this one from Concept 1 in Canada
So the Wagenwest answer to the problem is the one I went for, the description says it all and because I have just had a brand new nose cone fitted, so do not really need to be buy another modified version (as in the concept 1 solution) .
If I had seen the concept 1 solution before I had the gearbox overhauled I probably would have chosen it - I managed to ordered this via wagenwest website very quickly this morning before work - looking forward to it receiving it and getting on with the install.
Wagen west´s discription :
"Pre 59 bus nose cone adapter kit"
"This kit makes it so you can install a tunnel case transmission into your early bus, 1959 and down.
This adapter will not push your transmission back, like the other adapters on the market !!!!!!!!
Made with Polyurethane to help insulate the transmission from the bus, this helps keep the noise down in the cab and cargo area.
Kit comes with one Wagenswest lollipop mount and retainer plate.
This Lollipop is a simple solution to an age old problem.
Your type II nose cone will need to be trimmed to fit, like the photo in this add "
This does leave bit of a dilemma for me though - what do I do with the bus while I wait for it to come here?
I think I need to get the bus off the ramp as its stuck there until I can get the rear and front suspension on and I don't want to hog peka´s car ramp....
two options as I see it, Take my wheel Dolley´s over and see if I can sit the bus on these, then at least we can move the bus from the ramp and Peka can use it, also it might mean that peka can get the shell into the paint booth ?
or take away the front mount now and install the box, axle arms, spring plates etc and loosly fit everything just for transpotation around the work shop, maybe I can wedge the front nose cone into place, or use the set up I have now but not bolted up?
Find out on Thursday which is when I can next get over to the bus.
söndag 27 april 2014
One of those days
After a day sick on Friday I was surprised to feel much better on
Saturday morning- so with no time to waste I met up with peka at the
garage
he was already there - rebuilding his BBQ
The first thing peka told me when I came in was that he had flipped the front mount, just as I had thought to do and written on my last blog post ! So it was now in -
cool!
he was already there - rebuilding his BBQ
The first thing peka told me when I came in was that he had flipped the front mount, just as I had thought to do and written on my last blog post ! So it was now in -
cool!
I then set about the steering pin install, so I started to ream the front beam steering pin bushes,
First I used the tool from Rainier, I gave it a few passes but the pin still would nt slide right up and in?
So Peka lent me his calipers and we measured the pin and then while he looked for his reamer, I looked for the ones I had, turns out I had an adjustable one left by my brother when he had to do his on his slamdamaticbarndoor - Anyway I adjusted this up and gave it a pass, got to say it didn't feel so good, soon I found out that I had taken a bit too much off, now the pin fits but not as snug as i would have liked, not too bad either, Will see how this feels when its greased up and fully assembled.
So after cleaning up the tools, I headed to the back end of the bus to carry on installing the rear suspension parts, Happy with thr axles, so now I looked at fitting the spring plates and maybe even getting the axles bolted to them, however it was soon apparent that things were not lining up like they should do, The rear cradle mounts on the gearbox were out, and so I very carefully tightened up and bolted up what I could, being carefull of the order in which doing so, but soon I realized that the rear mount was out, at first i thought simply to adapt the mount but after leaving the garage and giving it more thought and a little looking into on the net I came to the conclusion that the nose cone mount could be better....

Its something left from Dicks set up (former owner), so I called Dick and asked him a few questions, and he told me that he did a lot of swearing when he was installing the rear parts, I didn't tell him that I have replaced it all, not the right thing to say after that comment : ) He also said he had found the old rear window glass, nice! and that i had better go by his some time to pick up the stuff.
This whole re work of the back end all started when I realized his set up had issues with tire clearance to spring plate and the fact that the old spring plates are "old school" cut up originals that I didnt fancy rolling on, his set up was linked with a bus boys type set up using spacers and short axles and early type 3 hubs, all this was not really ideal for me and it was of course none adjustable meaning wheel removal would be a hassle to say the least, so it wasn't a too difficult decision to sort it out....
The result is the replacing everything, but of course up until now not the nose cone mount !!! yep it looks like I need a different mount too, id over looked this and just thought that it would work seems the one I have from Dicks set up pushes out the box, it could be a reason why the frame horn bolts had been stripped a bit?
First I used the tool from Rainier, I gave it a few passes but the pin still would nt slide right up and in?
So Peka lent me his calipers and we measured the pin and then while he looked for his reamer, I looked for the ones I had, turns out I had an adjustable one left by my brother when he had to do his on his slamdamaticbarndoor - Anyway I adjusted this up and gave it a pass, got to say it didn't feel so good, soon I found out that I had taken a bit too much off, now the pin fits but not as snug as i would have liked, not too bad either, Will see how this feels when its greased up and fully assembled.
So after cleaning up the tools, I headed to the back end of the bus to carry on installing the rear suspension parts, Happy with thr axles, so now I looked at fitting the spring plates and maybe even getting the axles bolted to them, however it was soon apparent that things were not lining up like they should do, The rear cradle mounts on the gearbox were out, and so I very carefully tightened up and bolted up what I could, being carefull of the order in which doing so, but soon I realized that the rear mount was out, at first i thought simply to adapt the mount but after leaving the garage and giving it more thought and a little looking into on the net I came to the conclusion that the nose cone mount could be better....
Its something left from Dicks set up (former owner), so I called Dick and asked him a few questions, and he told me that he did a lot of swearing when he was installing the rear parts, I didn't tell him that I have replaced it all, not the right thing to say after that comment : ) He also said he had found the old rear window glass, nice! and that i had better go by his some time to pick up the stuff.
This whole re work of the back end all started when I realized his set up had issues with tire clearance to spring plate and the fact that the old spring plates are "old school" cut up originals that I didnt fancy rolling on, his set up was linked with a bus boys type set up using spacers and short axles and early type 3 hubs, all this was not really ideal for me and it was of course none adjustable meaning wheel removal would be a hassle to say the least, so it wasn't a too difficult decision to sort it out....
The result is the replacing everything, but of course up until now not the nose cone mount !!! yep it looks like I need a different mount too, id over looked this and just thought that it would work seems the one I have from Dicks set up pushes out the box, it could be a reason why the frame horn bolts had been stripped a bit?
I have now looked around and seen one that should work from ....T2D
it looks as though it will draw the whole gearbox 10- 15 mm nearer the front of the bus - this would mean all the other bolts line up where they should in relation, instead of pushing the box back in the bus as it is now - sorted, I hope.
So I need to call Paul in the morning and see what he says? and if he can get a gearbox nose cone mount shipped out to me ASAP, a good time to check in on the whereabouts of my front wheel bearings too.
Other stuff that's been happening, Victor just came by with his super nice fasty... got me thinking about air jackersSo I need to call Paul in the morning and see what he says? and if he can get a gearbox nose cone mount shipped out to me ASAP, a good time to check in on the whereabouts of my front wheel bearings too.
onsdag 23 april 2014
Nearly in
Noticed that if I flip the front nose cone mount that it might get the 5 mm I'm looking for to line up the nose cone with the bolts and gear shift rod tube.
Prenumerera på:
Inlägg (Atom)



















